Earthquake construction

Earthquake construction

Earthquake construction is a branch of architectural engineering concerned with making sure structures can withstand as severe an earthquake shock as possible given the materials available.

When, the structure in question is a human habitation, the questions of surviving earthquake damage become much more serious. Examples of inhabited structures collapsing during earthquakes abound and are sadly all too frequent. Areas of the world frequently hit by fatal earthquake damage include Japan, Turkey, Algeria, China and countless other regions on or near tectonic plate boundaries.

Earlier in mankind's history (during the Neolithic, for instance), mankind lived in tents, which can withstand earthquakes quite well. We moved on to more comfortable structures of timber, mud brick, limestone, wattle and daub, and even just stacked rubble.

Some of these materials can be used to form solid, earthquake resistant structures. The important part is to use them wisely and with an understanding of how earthquakes really apply stresses to structures in practice. A structure might have all the appearances of stability, yet offer nothing but danger when an earthquake occurs. The crucial fact is that for safety, earthquake resistant construction techniques are as important as using the correct materials.

For larger structures, more exotic means such as bearings and counterweights are often employed to reduce the impact of lateral ground movement on the protected structure.

The specific mode of failure in an earthquake for most structures is the lateral (sideways) shaking. It frequently collapses walls, or moves them enough that the roof displaces and falls in.

Development of earthquake construction techniques

People living in frequently shaken areas like Japan started early in developing earthquake resistant buildings based on scientific study. Other countries likewise have and continue to study intensely how to make their citizens safer by understanding the problems posed by earthquakes more accurately.

Until the last 75 years or so, the only way to run "frequent tests" was to build on a fault and hope. Even then, earthquakes may only happen at any given spot every couple of hundred years, and construction techniques may not therefore take account of earthquake concerns. Modern shake-tables have helped this; large motors and computer control systems try to precisely simulate earthquake movements to verify building models' seismic performance including, if necessary, their crash testing.

Modern materials like concrete and reinforced concrete can help, but they also must withstand the same lateral (sideways) forces. Usually these materials will break under the amount of lateral stress put on the object.

Good earthquake construction pays careful heed to lateral forces. Proper concrete construction involves significant use of steel reinforcing bar (rebar). All the joints (where beams meet the columns), are carefully tied in with rebar. The concrete is of very high quality, and high strength. Brick infill is avoided for the walls. All structures should be properly anchored with anchor bolts.

Most countries have building codes that specify lateral strength. In the Los Angeles, California area, it is legal to build an apartment building near the San Andreas Fault with a setback limit of 50 feet. The apartments are typically designed to withstand an earthquake of 7.8 on the Richter Scale and fail in predictable ways at that level. The reasoning behind this is that an earthquake above 7.8 will bring down almost any structure and it is very difficult to design a reasonably priced structure that will withstand an earthquake above 7.8 on the Richter Scale.

In residential structures, buildings are designed to have the roof fall in the middle of a room, but stay up near the walls. People are always urged to take refuge in doorways and away from the middle of the room, and are therefore safe in these buildings. The structure of a residence may also be attached to the foundation with bolts to prevent the building from sliding off the foundation during shaking and collapsing.

Now, there is a number of ways to control seismic performance of structures in order to sooth the damaging effect of strong earthquakes. The most effective of them is base isolation. The first evidence of earthquake protection by using the principle of base isolation was discovered in Pasargadae, a city in ancient Persia, now Iran: it goes back to VI century BC.

Ground stabilization

Another failure mode of a structure in an earthquake involves the soil underneath the structure. In a strong enough seismic event, the soil can be shaken hard enough that it will break up, sometimes leading to the collapse of the structure sitting upon it. The most common method of protecting a structure against this failure mode is to flow cement into the soil beneath the structure. This method provides marginal support for the structure as the cement may not set up evenly.

An alternative method to infusing the ground with cement is under study. The method involves using a bacterium that secretes a viscous, sticky polymer that binds the soil together. In an experiment, the bacteria, Flavobacterium johnsoniae, was mixed with sand and was given several days to colonize the sand. The friction coefficient of the sand was measured and compared against sand without the bacteria colony. The sand colonized with the bacteria was almost twice as solid as the sand without the polymer producing bacteria. (Banagan, "et al.", 2005)

ee also

*Earthquake Protector
*Earthquake performance evaluation
*Seismic retrofitting

References

* [http://www.abstractsonline.com/viewer/viewAbstractPrintFriendly.asp?CKey={B46182D5-918A-4203-8096-738DDECB7275}&SKey={6B0EC4DF-88AE-4D17-81C1-F28946FE22B1}&MKey={382D7E47-BE0B-4BBA-B3A6-E511C92FA999}&AKey={32093528-52DC-4EBE-9D80-29DAD84C92CE} Abstract]


Wikimedia Foundation. 2010.

Игры ⚽ Поможем написать реферат

Look at other dictionaries:

  • Earthquake engineering — is the study of the behavior of buildings and structures subject to seismic loading. It is a subset of both structural and civil engineering.The main objectives of earthquake engineering are: * Understand the interaction between buildings or… …   Wikipedia

  • EARTHQUAKE — EARTHQUAKE, ground vibrations produced generally by a sudden subterranean occurrence. Accounts of destructive earthquakes extend far into antiquity. In biblical times earthquakes, like thunder and other natural cataclysms, were regarded as… …   Encyclopedia of Judaism

  • Earthquake loss — estimation is usually performed in terms of a Damage Ratio (DR) which is a ratio of the earthquake damage dollar amount to total value of a buildingcite book|title= Financial Management of Earthquake Risk|author=EERI Endowment… …   Wikipedia

  • Construction Parasismique — Taipei 101, équipé accordé par tuned mass damper, est le deuxième plus grand gratte ciel du monde après Burj dubai La Construction parasismique est l étude du comportement des bâtiments et structures sujets à un chargement dynamique du type… …   Wikipédia en Français

  • Construction antiséismique — Construction parasismique Taipei 101, équipé accordé par tuned mass damper, est le deuxième plus grand gratte ciel du monde après Burj dubai La Construction parasismique est l étude du comportement des bâtiments et structures sujets à un… …   Wikipédia en Français

  • Construction parasismique — Taipei 101, équipé accordé par tuned mass damper, est le deuxième plus grand gratte ciel du monde après Burj dubai La Construction parasismique est l étude du comportement des bâtiments et structures sujets à un chargement dynamique du type… …   Wikipédia en Français

  • Construction of the Trans-Alaska Pipeline System — The construction of the Trans Alaska Pipeline System was a massive undertaking involving tens of thousands of people often in extreme temperatures and conditions. Specialized construction techniques were pioneered to build the pipeline, most of… …   Wikipedia

  • Construction engineering — The Berlin Brandenburg Airport under construction. The facility starts full operation in 2012. Construction engineering is a professional discipline that deals with the designing, planning, construction, and management of infrastructures such as… …   Wikipedia

  • Construction industry of Japan — In Japan, the mainstay of infrastructure development is the construction industry, which employed 9.4 percent of the labor force in 1990 and contributed some 8.5 percent of GDP. After the two oil crises (1973 and 1979) in the 1970s, construction… …   Wikipedia

  • Great Hanshin earthquake — Great Hanshin Earthquake …   Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”