Carrier generation and recombination

Carrier generation and recombination

In the solid state physics of semiconductors, carrier generation and recombination are processes by which mobile electrons and electron holes are created and eliminated. Carrier generation and recombination processes are fundamental to the operation of many optoelectronic semiconductor devices, such as photodiodes, LEDs and laser diodes. They are also critical to a full analysis of p-n junction devices such as bipolar junction transistors and p-n junction diodes.

The electron–hole pair is the fundamental unit of generation and recombination, corresponding to an electron transitioning between the valence band and the conduction band.

Band structure

Like other solids, semiconductor materials have electronic band structure determined by the crystal properties of the material. The actual energy distribution among the electrons is described by the Fermi energy and the temperature of the electrons. At absolute zero temperature, all of the electrons have energy below the Fermi energy; but at non-zero temperatures the energy levels are randomized and some electrons have energy above the Fermi level.

". The valence band, immediately below the forbidden band, is normally very nearly completely occupied. The conduction band, above the Fermi level, is normally nearly completely empty. Because the valence band is so nearly full, its electrons are not mobile, and cannot flow as electrical current.

However, if an electron in the valence band acquires enough energy to reach the conduction band, it can flow freely among the nearly empty conduction band energy states. Furthermore it will also leave behind an electron hole that can flow as current exactly like a physical charged particle. Carrier "generation" describes processes by which electrons gain energy and move from the valence band to the conduction band, producing two mobile carriers; while "recombination" describes processes by which a conduction band electron loses energy and re-occupies the energy state of an electron hole in the valence band.

In a material at thermal equilibrium generation and recombination are balanced, so that the net charge carrier density remains constant. The equilibrium carrier density that results from the balance of these interactions is predicted by thermodynamics. The resulting probability of occupation of energy states in each energy band is given by Fermi-Dirac statistics.

Generation and recombination processes

Carrier generation and recombination result from interaction between electrons and other carriers, either with the lattice of the material, or with optical photons. As the electron moves from one energy band to another, its gained or lost energy must take some other form, and the form of energy distinguishes various types of generation and recombination:

Shockley–Read–Hall (SRH) process

The electron in transition between bands passes through a state created in the middle of the band gap by an impurity in the lattice. The impurity state can absorb differences in momentum between the carriers, and so this process is the dominant generation and recombination process in silicon and other indirect bandgap materials. The energy is exchanged in the form of lattice vibration, or a phonon exchanging thermal energy with the material.

Photon exchange

During "radiative recombination", a form of spontaneous emission, a photon is emitted with the wavelength corresponding to the energy released. This effect is the basis of LEDs. Because the photon carries relatively little momentum, radiative recombination is significant only in direct bandgap materials.

When photons are present in the material, they can either be absorbed, generating a pair of free carriers, or they can "stimulate" a recombination event, resulting in a generated photon with similar properties to the one responsible for the event. Absorption is the active process in photodiodes, solar cells, and other semiconductor photodetectors, while stimulated emission is responsible for laser action in laser diodes.

Auger recombination

The energy is given to a third carrier, which is excited to a higher energy level without moving to another energy band. After the interaction, the third carrier normally loses its excess energy to thermal vibrations. Since this process is a three-particle interaction, it is normally only significant in non-equilibrium conditions when the carrier density is very high. The Auger generation process is not easily produced, because the third particle would have to begin the process in the unstable high-energy state.

References

External links


Wikimedia Foundation. 2010.

Игры ⚽ Нужно сделать НИР?

Look at other dictionaries:

  • Recombination — may refer to: * Genetic recombination, the process by which genetic material is broken and joined to other genetic material * Carrier generation and recombination, processes by which mobile electrons and electron holes are created and eliminated… …   Wikipedia

  • Non-radiative recombination — is a process in phosphors and semiconductors, whereby charge carriers recombine without releasing photons. A phonon is released instead. Non radiative recombination in optoelectronics and phosphors is an unwanted process, lowering the light… …   Wikipedia

  • Education and training of electrical and electronics engineers — Both electrical and electronics engineers typically possess an academic degree with a major in electrical/ electronics engineering. The length of study for such a degree is usually three or four years and the completed degree may be designated as …   Wikipedia

  • Semiconductor — Citations missing|date=March 2008A semiconductor is a solid material that has electrical conductivity in between a conductor and an insulator; it can vary over that wide range either permanently or dynamically. [. They are used in many… …   Wikipedia

  • Charge carriers in semiconductors — There are two recognized types of charge carriers in semiconductors. One of them is electrons, which carry negative electric charge. In addition, it is convenient to treat the traveling vacancies in the valence band electron population (holes) as …   Wikipedia

  • MOSFET — Two power MOSFETs in the surface mount package D2PAK. Operating as switches, each of these components can sustain a blocking voltage of 120 volts in the OFF state, and can conduct a continuous current of 30 amperes in the ON state, dissipating up …   Wikipedia

  • Deep-level transient spectroscopy — (DLTS) is an experimental tool for studying electrically active defects (known as charge carrier traps) in semiconductors. DLTS establishes fundamental defect parameters and measures their concentration in the material. Some of the parameters are …   Wikipedia

  • Шокли, Уильям Брэдфорд — Уильям Брэдфорд Шокли англ. William Bradford Shockley Шокли в 1975 году Дата рождения: 13 февраля 1 …   Википедия

  • Auger effect — The Auger effect (pronEng|ˈɔːʒɚ, or Oh jeh) is a phenomenon in physics in which the emission of an electron from an atom causes the emission of a second electron. [GoldBookRef|title=Auger effect|url=http://goldbook.iupac.org/A00520.html] When an… …   Wikipedia

  • Chih-Tang Sah — (chinesisch 薩支唐 Sà Zhītáng, genannt Tom Sah, *10. November 1932 in Peking) ist ein chinesisch US amerikanischer Physiker und Elektroingenieur. Inhaltsverzeichnis 1 Leben und Werk 2 Schriften 3 …   Deutsch Wikipedia

Share the article and excerpts

Direct link
Do a right-click on the link above
and select “Copy Link”